Zoeller BN98 Effluent Pump

Item #: ZOEBN98ST

Product Description

Model 98 Cast Iron Series

Features

Non-clogging engineered plastic vortex impeller design
Corrosion resistant powder coated epoxy finish
Durable cast construction. Cast switch case, motor, pump housing and base. No sheet metal parts to rust or corrode
Castings - All cast iron class 25-30 25000# tensile strength
Stainless steel screws, guard, handle, arm and seal assembly
Float operated submersible (NEMA 6) 2-pole mechanical switch
Motor - Permanent split capacitor, 60 Hz, 1725 RPM, oil-filled, hermetically sealed, automatic reset thermal overload protection
Bearings - Upper & lower oil fed cast iron
Carbon and ceramic shaft seal
Entire unit pressure tested after assembly
Watertight neoprene ring between motor and pump housing
Maximum temperature for effluent or dewatering 130°F - 54°C
Passes 1/2 inch spherical solids
No screens to clog
Standard cord length 15 ft. (UL Listed)
1 1/2" NPT Discharge (11/2" X 2" PVC Adapter included with BN & BE Models)
On point - 9 1/2"
Off point - 3”
Major width - 10 1/8"
Height - 12"

The sizing of effluent systems normally requires variable level float(s) controls and properly sized basins to achieve required pumping cycles or dosing timers with nonautomatic pumps.