untitled

FL30-Series

Effluent

Pumps

1/3 hp

3/4" Solids Handling

Specifically designed

for STEP Systems,

LPP Systems,

Mound Systems,

Liquid Waste Transfer

and Commercial

Sump Applications

Features:

· Vortex impeller, made of high

temperature engineering

polymer, permits passage

of solids without clogging

· Cast iron construction with all

stainless and brass fasteners

· 416 stainless steel rotor shaft

· Oil-filled, thermally protected motor

· Permanently lubricated bearings

· Unitized shaft seal

· 1-1/2" FNPT discharge

· Quick-disconnect 10' standard power

cord allows replacement of cord

in seconds without breaking seals

to motor. (25' length optional)

Models:

FL31M 115V, 12a, Manual
FL31A 115V, 12a, Automatic
FL32M 208-230V, 6.6a, Manual
FL32A 208-230V, 6.6a, Automatic

Automatic model features a mercury-free
wide angle float with series plug allows
for manual operation of pump separate
from switch.

TECHNICAL SPECIFICATIONS

FL30-SERIES

PUMP

The pump(s) shall be model _________________
as manufactured by Liberty Pumps, Bergen, NY,
or equal.

The pump(s) shall have a capacity of ____ GPM at
a total dynamic head of ____ feet. Motor size shall
be 1/3 horsepower, single phase, 60 hz. and
__________ volt operation (115V or 208-230V).

MOTOR

The pump motor shall be of the submersible
type, oil filled, hermetically sealed and shall be
thermally protected. The overload element shall
automatically reset when motor cools. Motor
windings shall be of the class A insulation rating.

The rotor shaft shall be made of 416 stainless
steel and shall be supported by lower and
upper sleeve bearings.

IMPELLER

The pump shall have a VORTEX style impeller
made of high temperature engineering polymer,
capable of passing a minimum 3/4" spherical
solid.

SEAL

The shaft seal shall be of the carbon/ceramic
unitized design, with BUNA N elastomers and
stainless housings.

EXTERNAL CONSTRUCTION

The pump volute, legs and motor housing shall
be gray iron castings, class 25 or better. All
castings shall be epoxy powder coated before
assembly. All fasteners shall be of 300-series
stainless steel or brass.

LEVEL CONTROL

The pump shall be controlled by an adjustable
mercury-free switch sealed in PVC float, and shall
have a series plug for manual bypass operation.

MODELS

VOLTS

PHASE AMPS

DISCHARGE

AUTOMATIC

IMPELLER

FL31M

1/3

115

1-1/2" FNPT

VORTEX

FL31A

1/3

115

1-1/2" FNPT

YES

VORTEX

FL32M

1/3

208-230

6.6

1-1/2" FNPT

VORTEX

FL32A

1/3

208-230

6.6

1-1/2" FNPT

YES

VORTEX

10' cord standard on above models. For 25' cord options, add a "-2" suffix to model number.

Example: FL31A-2 for Model FL31A with 25' cord.

DIMENSIONAL DATA:

Weight: FL31M: 31 LBS.

Height:

9.6"

Major Width:

9.8" (manual model)

Maximum fluid temperature 140 degrees F.

PERFORMANCE CURVE

1550 RPM

U.S. Gallons Per Minute

otal Head in Feet

otal Head in Meters

Liters Per Second

1.4

2.8

4.2

TDH

10'
15'
19'

GPM

52
42
27

Specifications are subject to change without notice.