The Junior Super Single Alarm Float is for use up to a 1/2 HP pump or any alarm. 110 Volt/13 amp
The No Vault Pump Filter is used with high head submersible pumps to filter effluent before entering the pump for discharge to final disposal.
Fits Bullet High Head Effluent Pumps
22 GPM, 1/2 HP, 1 1/4" Discharge
The Bullet BP12 Highhead Effluent Pump is a mid-section screened pump ideal for high pressure/high head applications (including clean water, filtered effluent to an irrigation sprinkler, drip irrigation, mound system or any filtered application requiring high head or pressure.
Model BP-12: 12 gallons per minute
The 4" diameter Bullet Pump has a 1/2 HP oil-filled, 120-volt, continuous duty submersible motor and a 15-foot 3-wire, 1 phase ground cord.
Requires separate float switch to operate (SJE1001896)
Warranty
This Float Switch 10-Foot Float Cable 120v dual purpose float switch can be used for both emptying and filling operations. (10-foot float cable, 120 volt unit)
Suitable for use in septic, sump, and potable water applications.
The Float Switch 10-Foot Float Cable is also available in 6, 16, 33, and 100-foot float cables and 220 volt units. Call us at 800-778-1540 for pricing.
Warranty
Max Filter Socks are specifically designed as replacement filters for Multi-Flo/Enviro-Guard* tanks. The Max Filters (30-Pk) meets or exceeds industry standards for this type of filtration system. A filter “sock” that is washable and reusable, the Max filters are effective at trapping debris and particulates proven to help ensure the smooth operation of the system. The fibers of the Max Filters are durable enough to withstand the environment of a submersible aerator.
Proudly made in the USA, the Max Filter Sock is key to system maintenance and performance in Multi-Flo/Enviro-Guard tanks. Changing out or cleaning your filter sock is vital to protect against a system backup due to a clogged filter. Max Filter Socks can be cleaned when the filter becomes clogged with debris, particulates, and other materials. However, sometimes the filter socks get plugged by grease, soap, residue, or solids which make cleaning a chore. Save yourself time and energy and grab the Max Filters (30-Pack) for simple and easy filter sock replacement.
A standard residential system should be pumped every 2 to 4 years.
Filter socks may be used in an Enviro-Guard tank and a Multi-Flo©* tank.
*Multi-Flo© is a registered trademark of Consolidated Treatment Systems, Inc. All original manufacturer's names, drawings and part numbers are used for identification purposes only and we are in no way implying that any of our products are original equipment parts, or are affiliated with, or endorsed or approved by the original manufacturers.