The Flagg-Air® 340HT-J™ Septic Aerator is a brand-new, not refurbished, shaft-style septic aerator with 12” brackets designed specifically for use in Jet®* tanks as a premium OEM replacement for ALL Jet® aerator units (including models 660, 665, and 700LL), Alpha Air AL500-12 model, and model 735.

The Flagg-Air® 340HT-J™ Septic Aerator features a low RPM with high CFM, fully enclosed continuous duty motor with 2-foot power cord; pre-lubricated and sealed bearings; and a 7-amp mini breaker. This shaft-style aerator has a 304 stainless-steel aerator shaft, bronze coupler, and powder-coated steel brackets that have rubber vibration restrictors to provide improved mounting stability and bearing life. The Flagg-Air® 340HT-J™ Septic Aerator uses only high-impact plastic for the suds restrictor, aspirator, and the 3-in-1 T-Bar handle.

The distinguishing difference between the 340HT™ Series Flagg-Air® aerators is bracket size. The FA340HT-J™ is a Jet® septic aerator replacement with 12-inch brackets designed to fit the 10” diameter tank opening in Jet® aerobic septic systems. The FA340HT-N™ is a Norweco Singulair® ** septic aerator alternative with 14-inch brackets designed to fit the 12” diameter tank opening of Norweco Singulair® aerobic septic systems. Jet® septic aerators will be red and Norweco Singulair® aerators will be blue. Measure your tank opening to determine which aerobic septic system pump replacement to buy or call our Customer Service at (800) 778-1540 for assistance.

Every Flagg-Air® septic aerator includes a separate 7-amp mini circuit breaker to protect the motor. Installation of this mini breaker is required for warranty purposes. If you are replacing a Flagg-Air® septic shaft aerator, it is recommended to replace an existing 7-amp breaker with the new one that was shipped with your unit.

The Flagg-Air® 340HT-N™ Septic Aerator is a brand-new, not refurbished, shaft-style septic aerator with 14” brackets designed specifically for use in Norweco Singulair®* tanks as a premium OEM replacement for ALL Norweco Singulair® aerator units (including models 96, 960, 206C and 780), Alpha Air model AL500-14, and model 735.

The Flagg-Air® 340HT-N™ Septic Aerator features a low RPM with high CFM, fully enclosed continuous duty motor with 2-foot power cord; pre-lubricated and sealed bearings; and a 7-amp mini breaker. This shaft-style aerator has a 304 stainless-steel aerator shaft, bronze coupler, and powder-coated steel brackets that have rubber vibration restrictors to provide improved mounting stability and bearing life. The Flagg-Air® 340HT-N™ Septic Aerator uses only high-impact plastic for the suds restrictor, aspirator, and the 3-in-1 T-Bar handle.

The distinguishing difference between the 340HT Series Flagg-Air® aerators is bracket size. The FA340HT-N™ is a Norweco Singulair® septic aerator alternative with 14-inch brackets designed to fit the 12” diameter tank opening of Norweco Singulair® aerobic septic systems. The FA340HT-J™ is a Jet®** septic aerator replacement with 12-inch brackets designed to fit the 10” diameter tank opening in Jet® aerobic septic systems. Norweco Singulair® aerators will be blue and Jet® septic aerators will be red. Measure your tank opening to determine which aerobic septic system pump replacement to buy or call our Customer Service at (800) 778-1540 for assistance.

Every Flagg-Air® Septic Aerator includes a separate 7-amp mini circuit breaker to protect the motor. Installation of this mini breaker is required for warranty purposes. If you are replacing a Flagg-Air® septic shaft aerator, it is recommended to replace an existing 7-amp breaker with the new one that was shipped with your unit.

The Flagg-Air® 340HT™ Replacement Motor is the exact replacement for all Flagg Air® 340 units. This model requires a 7 AMP mini breaker in the control panel

Warranty

We offer a 2-year limited warranty on all Flagg-Air® Aerators.

This Flagg-Air® 340HT™ Complete Shaft assembly is compatible with the 340HT-J™ Flagg-Air® Aerator.

Includes an aspirator tip, stainless steel shaft, suds restrictor, and bronze coupler with set screw.

This Flagg-Air® 340HT™ Complete Shaft assembly is compatible with the 340HT-N™ Flagg-Air® Aerator.

Includes an aspirator tip, stainless steel shaft, suds restrictor, and bronze coupler with set screw.

The Flagg-Air® 340HT™ & 340HP™ Aspirator Tip is a replacement part for Flagg-Air® 340HT™ & 340HP™ only and will not fit on other brand shaft style aerators.

The Flagg-Air® 340HT™ & 340HP™ Aspirator Tip is a replacement part for Flagg-Air® 340HT™ & 340HP™ only and will not fit on other brand shaft style aerators.

Flagg-Air® 340HT-J™ Bracket Set is built for use on HT and HP Series models. They are 12" diameter installed and fit in 10" opening for Jet riser.

Jet is a registered trademark of Jet, Inc.

The Flagg-Air® 340HT-N™ Brackets are built for use on HP and HT series pumps they are 14" diameter installed and fit in 12" opening for Norweco-Singular riser.

Norweco is a registered trademark of Norwalk Wastewater Equipment Company, Inc.

Rubber Tips are used on Flagg-Air® 340 and all other manufacturer's brackets requiring vibration dampers, sold in sets of 4.

If in need of rubber tips for upper and lower brackets, order two (2) sets for a total of 8 tips.

The Flagg-Air® 340HT™ & 340HP™ Suds Restrictor is specifically designed to fit only the Flagg-Air® 340 Aerator models.

The Flagg-Air® 340HT™ & 340HP™ Suds Restrictor is specifically designed to fit only the Flagg-Air® 340HT™ & 340HP™ Aerator models. The red suds restrictor is used on Flagg-Air® 340HT-J™ units which are used as Jet* replacements.

* Jet is a registered trademark of Jet, Inc.

The Flagg-Air® 340HT™ & 340HP™ handle is a factory replacement part for the Flagg-Air® 340HT™ & 340HP™ model J.

The Flagg-Air® 340HT™ & 340HP™ handle is a factory replacement part for the Flagg-Air® 340HT™ & 340HP™ model N unit.

7 Amp Mini Circuit Breaker is used with the Flagg-Air® 340-HP™ and 340-HT™ Aerators and the Red Alert P101FA-2 Control Panel or for any aerators requiring a 7 Amp Mini Circuit breaker.

4 Amp Mini Circuit Breaker used with old-style Flagg-Air® 340, Jet and Norweco (NOT Flagg-Air 340HP/HT). Check your control panel to verify the current circuit breaker size.

* Jet is a registered trademark of Jet, Inc. Norweco/Singulair is a registered trademark of Norwalk Wastewater Equipment Company, Inc.