22 GPM, 1/2 HP, 1 1/4" Discharge
The Bullet BP12 Highhead Effluent Pump is a mid-section screened pump ideal for high pressure/high head applications (including clean water, filtered effluent to an irrigation sprinkler, drip irrigation, mound system or any filtered application requiring high head or pressure.
Model BP-12: 12 gallons per minute
The 4" diameter Bullet Pump has a 1/2 HP oil-filled, 120-volt, continuous duty submersible motor and a 15-foot 3-wire, 1 phase ground cord.
Requires separate float switch to operate (SJE1001896)
Warranty
30 GPM, 1/2 hp, 1 1/4" Discharge
The Bullet BP20 Highhead Effluent Pump is a mid-section screened pump ideal for high pressure/high head applications (including clean water, filtered effluent to an irrigation sprinkler, drip irrigation, mound system or any filtered application requiring high head or pressure.
Model BP-20: 20 gallons per minute
The 4" diameter Bullet Pump has a 1/2 HP oil-filled, 120-volt, continuous duty submersible motor and a 15-foot 3-wire, 1 phase ground cord.
Requires separate float switch to operate (SJE1001896)
Warranty
The No Vault Pump Filter is used with high head submersible pumps to filter effluent before entering the pump for discharge to final disposal.
Fits Bullet High Head Effluent Pumps
The Franklin Electric J-class E-Series high head filtered effluent submersible pump designed for use with sprinkler systems, drip systems, mound systems, spray systems, and many other high pressure pumping applications as well as ornamental fountains/waterfalls.
Warranty
The Franklin Electric J-class E-Series high head filtered effluent submersible pump designed for use with sprinkler systems, drip systems, mound systems, spray systems, and many other high pressure pumping applications as well as ornamental fountains/waterfalls.
Warranty
Filter by:
Clear All