Order By Phone – (800) 778-1540 or (636) 583-1608 – M-F: 8:00AM to 4:30PM (CST)
Actuating Rod for Whirlwind model STA40 moves back and forth between diaphragms. The actuating rod may need to be replaced if it is cracked or shows signs of wear.
Replacement gasket for Whirlwind models STA100, STA120, STA200. This gasket is located between the cover and the filter.
The Whirlwind L-Tube connects the diaphragms on each end of the pump to the air tank in the base of the pump. A set consists of two and takes one set per pump.
Whirlwind STA100 & STA120 Rubber Vibration Spacer. Installed between base plate and core frame to minimize vibration. Four per set; each pump requires one set.
Whirlwind STA60 and STA80 Rubber Vibration Spacer. Installed between base plate and core frame to minimize vibration. Four per set; each pump requires one set.
The Whirlwind L-Tube connects the diaphragms on each end of the pump to the air tank in the base of the pump. A set consists of two and takes one set per pump.
The Whirlwind 90 Degree Rubber Connection Fitting is 5/8" Inner Diameter hose (both ends) and is used to connect air lines to air pump. Includes two clamps. This part can be used on all Whirlwind Linear Air Pumps .
Replacement gasket for Whirlwind models STA40, STA60, STA80, and STA80AL. This gasket is located between the cover and air filter.