Junior Super Single Alarm Float

The Bullet BP20 Highhead Effluent Pump is a mid-section screened pump ideal for high pressure/high head applications (including clean water, filtered effluent to an irrigation sprinkler, drip irrigation, mound system or any filtered application requiring high head or pressure.

Model BP-20: 20 gallons per minute

The 4" diameter Bullet Pump has a 1/2 HP oil-filled, 120-volt, continuous duty submersible motor and a 15-foot 3-wire, 1 phase ground cord.

Requires separate float switch to operate (SJE1001896)

Warranty

We offer an 18-month limited warranty on all Bullet Highhead Effluent Pumps.

Designed to remotely operate your shaft-style aerator, the Red Alert P101FA-2 Control Panel is a compatible replacement for Jet®* and Norweco Singulair®** control panels as well as corresponding alternative aerators like the Flagg-Air 340HT-J and Flagg-Air 340HT-N models. This unit is designed specifically for shaft-style aerators.

For other types of aerator systems, see the Red Alert P101-2 Control Panel.

The Red Alert control panel is manufactured for longevity in indoor and outdoor use. Crafted from industrial-grade plastics, UL-rated weather-resistant housing, and anti-corrosive zinc-plated screw terminals, this control panel is resistant to wear and temperature extremes.

With the Red Alert™ 24-time control technology, the P101FA-2 is completely programmable with a control timer, warning light, 7-amp breaker, and a 3-position toggle switch that allows the unit to be on/auto; off; or in continuous run mode. The ability to program down to 15-minute intervals gives you precise control over your aerator scheduling.

The Red Alert P101FA-2 Control Panel also features a 7-amp mini breaker to protect your aerator. Fibrous debris, like hair, can get wrapped around the shaft of your aerator or water levels in the tank can get too high, making the motor work harder against this resistance. In these scenarios, the 7-amp mini breaker will trip, interrupting the current, causing the aerator to shut off rather than damage the motor. This gives you the opportunity to remove the debris before resetting the breaker and restarting the unit. The Red Alert P101FA-2 Control Panel’s breaker reset button is located on the front of the panel for easy access.

*Jet® is a registered trademark of Jet Inc. All original manufacturer's names, drawings and part numbers are used for identification purposes only and we are in no way implying that any of our products are original equipment parts, or are affiliated with, or endorsed or approved by the original manufacturers.

**Norweco Singulair® is a registered trademark of the Norwalk Wastewater Equipment Company, Inc. All original manufacturer's names, drawings and part numbers are used for identification purposes only and we are in no way implying that any of our products are original equipment parts, or are affiliated with, or endorsed or approved by the original manufacturers.

Warranty

We offer a 2-year limited warranty on Red Alert Control Panels.

This Float Switch 10-Foot Float Cable 120v dual purpose float switch can be used for both emptying and filling operations. (10-foot float cable, 120 volt unit)

Suitable for use in septic, sump, and potable water applications.

The Float Switch 10-Foot Float Cable is also available in 6, 16, 33, and 100-foot float cables and 220 volt units. Call us at 800-778-1540 for pricing.

Warranty

Float Switch 10-Foot Float Cable 120V comes with a 2-year manufacturer warranty.

The Flagg-Air® 340HT-J Septic Aerator is a brand-new, not refurbished, shaft-style septic aerator with 12” brackets designed specifically for use in Jet®* tanks as a premium OEM replacement for ALL Jet® aerator units (including models 660, 665, and 700LL), Alpha Air AL500-12 model, and model 735.

The Flagg-Air® 340HT-J Septic Aerator features a low RPM with high CFM, fully enclosed continuous duty motor with 2-foot power cord; pre-lubricated and sealed bearings; and a 7-amp mini breaker. This shaft-style aerator has a 304 stainless-steel aerator shaft, bronze coupler, and powder-coated steel brackets that have rubber vibration restrictors to provide improved mounting stability and bearing life. The Flagg-Air® 340HT-J Septic Aerator uses only high-impact plastic for the suds restrictor, aspirator, and the 3-in-1 T-Bar handle.

The distinguishing difference between the 340HT Series Flagg-Air® aerators is bracket size. The FA340HT-J is a Jet® septic aerator replacement with 12-inch brackets designed to fit the 10” diameter tank opening in Jet® aerobic septic systems. The FA340HT-N is a Norweco Singulair® ** septic aerator alternative with 14-inch brackets designed to fit the 12” diameter tank opening of Norweco Singulair® aerobic septic systems. Jet® septic aerators will be red and Norweco Singulair® aerators will be blue. Measure your tank opening to determine which aerobic septic system pump replacement to buy or call our Customer Service at (800) 778-1540 for assistance.

Every Flagg-Air® septic aerator includes a separate 7-amp mini circuit breaker to protect the motor. Installation of this mini breaker is required for warranty purposes. If you are replacing a Flagg-Air® septic shaft aerator, it is recommended to replace an existing 7-amp breaker with the new one that was shipped with your unit.

The Liberty FL31A Effluent Pump offers a true commercial-grade, heavy-duty design low-head effluent pump with 3/4" solids-handling capability. The FL31A features heavy cast iron construction, epoxy powder coat finish, and a quick-disconnect power cord in 10-foot or 25-foot.

The Liberty FL31A Effluent Pump has a 1/3 hp motor, 1-1/2" FNPT discharge and 3/4" solids handling capability.

Specifically designed for STEP Systems, LPP Systems, Mound Systems, Liquid Waste Transfer and Commercial Sump Applications.

Warranty

The Liberty FL31A Effluent Pump comes with a 3-year manufacturer warranty.