Whirlwind R4247 Regenerative Blower

The Flagg-Air® 340HT-N Septic Aerator is a brand-new, not refurbished, shaft-style septic aerator with 14” brackets designed specifically for use in Norweco Singulair®* tanks as a premium OEM replacement for ALL Norweco Singulair® aerator units (including models 96, 960, 206C and 780), Alpha Air model AL500-14, and model 735.

The Flagg-Air® 340HT-N Septic Aerator features a low RPM with high CFM, fully enclosed continuous duty motor with 2-foot power cord; pre-lubricated and sealed bearings; and a 7-amp mini breaker. This shaft-style aerator has a 304 stainless-steel aerator shaft, bronze coupler, and powder-coated steel brackets that have rubber vibration restrictors to provide improved mounting stability and bearing life. The Flagg-Air® 340HT-N Septic Aerator uses only high-impact plastic for the suds restrictor, aspirator, and the 3-in-1 T-Bar handle.

The distinguishing difference between the 340HT Series Flagg-Air® aerators is bracket size. The FA340HT-N is a Norweco Singulair® septic aerator alternative with 14-inch brackets designed to fit the 12” diameter tank opening of Norweco Singulair® aerobic septic systems. The FA340HT-J is a Jet®** septic aerator replacement with 12-inch brackets designed to fit the 10” diameter tank opening in Jet® aerobic septic systems. Norweco Singulair® aerators will be blue and Jet® septic aerators will be red. Measure your tank opening to determine which aerobic septic system pump replacement to buy or call our Customer Service at (800) 778-1540 for assistance.

Every Flagg-Air® Septic Aerator includes a separate 7-amp mini circuit breaker to protect the motor. Installation of this mini breaker is required for warranty purposes. If you are replacing a Flagg-Air® septic shaft aerator, it is recommended to replace an existing 7-amp breaker with the new one that was shipped with your unit.

The FS-19P-100 Filter Assembly is for use with Gast R2103 Regenerative Blower.

The filter assembly includes an inlet air filter housing and a FS-19P Filter Element.

Includes FS-19P Filter Element

The Flagg-Air® 340HT-J Septic Aerator is a brand-new, not refurbished, shaft-style septic aerator with 12” brackets designed specifically for use in Jet®* tanks as a premium OEM replacement for ALL Jet® aerator units (including models 660, 665, and 700LL), Alpha Air AL500-12 model, and model 735.

The Flagg-Air® 340HT-J Septic Aerator features a low RPM with high CFM, fully enclosed continuous duty motor with 2-foot power cord; pre-lubricated and sealed bearings; and a 7-amp mini breaker. This shaft-style aerator has a 304 stainless-steel aerator shaft, bronze coupler, and powder-coated steel brackets that have rubber vibration restrictors to provide improved mounting stability and bearing life. The Flagg-Air® 340HT-J Septic Aerator uses only high-impact plastic for the suds restrictor, aspirator, and the 3-in-1 T-Bar handle.

The distinguishing difference between the 340HT Series Flagg-Air® aerators is bracket size. The FA340HT-J is a Jet® septic aerator replacement with 12-inch brackets designed to fit the 10” diameter tank opening in Jet® aerobic septic systems. The FA340HT-N is a Norweco Singulair® ** septic aerator alternative with 14-inch brackets designed to fit the 12” diameter tank opening of Norweco Singulair® aerobic septic systems. Jet® septic aerators will be red and Norweco Singulair® aerators will be blue. Measure your tank opening to determine which aerobic septic system pump replacement to buy or call our Customer Service at (800) 778-1540 for assistance.

Every Flagg-Air® septic aerator includes a separate 7-amp mini circuit breaker to protect the motor. Installation of this mini breaker is required for warranty purposes. If you are replacing a Flagg-Air® septic shaft aerator, it is recommended to replace an existing 7-amp breaker with the new one that was shipped with your unit.

Whirlwind® STA Series Septic Air Pumps are dependable, energy-efficient aerators that offer extremely quiet operation and excellent long life. Whirlwind® linear air pumps use diaphragms to compress and move air through heavy-duty tubing into the wastewater of your septic aeration tank. The Whirlwind® STA80N Septic Air Pump operates 80 LPM at 2.18 PSI with a maximum continuous operating pressure of 4.35 PSI. The STA80N also achieves a maximum open air flow of 3.9 CFM. Linear diaphragm air pumps are effective pumps for septic aeration and have been widely used for pond aeration, as well as applications in medical and laboratory settings.

The Whirlwind® STA80N Septic Air Pump is a compatible septic tank pump replacement for original equipment manufacturer (OEM) 80 LPM models including: Alita AL-80, Blue Diamond ET-80/ETX-80, FujiMAC MAC80R II, Hiblow HP-80, Secoh EL-80/JDK-80, and Thomas AP-80/AP-80H.

Warranty

We offer a 2-Year Limited Warranty on all Whirlwind Septic Air Pumps.

Whirlwind® STA Series Septic Air Pumps are dependable, energy-efficient aerators that offer extremely quiet operation and excellent long life. Whirlwind® linear air pumps use diaphragms to compress and move air through heavy-duty tubing into the wastewater of your septic aeration tank. The Whirlwind® STA60N Septic Air Pump operates 60 LPM at 2.18 PSI with a maximum continuous operating pressure of 4.35 PSI. The STA60N also achieves a maximum open air flow of 3.7 CFM. Linear diaphragm air pumps are effective pumps for septic aeration and have been widely used for pond aeration, as well as applications in medical and laboratory settings. The STA60N Septic Air Pump is sometimes used in 500 GPD aerobic treatment units, however the Whirlwind® STA80N model is utilized most often.

The Whirlwind® STA60N Septic Air Pump is a compatible septic tank pump replacement for original equipment manufacturer (OEM) 60 LPM models including: Alita AL-60, Blue Diamond ET-60/ETS-60, FujiMAC MAC60R II, Hiblow HP-60, Secoh EL-60/JDK-60, and Thomas AP-60/AP-60.

Warranty

We offer a 2-year limited warranty on all Whirlwind® Septic Air Pumps.